Solar panels Sussex

Across Sussex

Solar panel installation in Sussex

Thinking about solar panels for your home in Sussex? This page walks through each stage of an installation, what it typically costs according to several UK sources, and what to check before you sign, so you can compare up to 3 free, no obligation quotes from local installers with confidence.

Starting with a survey

Every installation should begin with a proper look at your home. A survey usually covers which way your roof faces, its pitch, any shading from chimneys, trees or neighbouring buildings, the condition of the tiles or slates, and the structure underneath. The installer will also want to see your fuse box, think about where the inverter and any battery would go, and work out a route for the cables.

The Planning Portal says the ability of the existing roof to carry the weight of the panels will need to be proven, so expect questions about the age of the roof and what is holding it up. Checkatrade lists a structural survey at £150 where one is needed, which is worth knowing if your roof is older or has been altered.

System design and sizing

Once the installer understands your roof and your usage, they will design a system and estimate how much electricity it should generate. The Energy Saving Trust says domestic systems are generally around 4.5kWp and cost around £7,600, and that a 4.5kWp system typically covers between 20 to 30 square metres of roof, usually using around 12 panels.

Orientation matters. The Energy Saving Trust says a system facing east or west tends to get around 15 to 20% less energy than one facing directly south.

For a sense of what a well placed roof can do on the south coast, Sunsave quotes an MCS figure of 1,132kWh per kWp a year for Brighton, based on a south facing roof at a 40 degree angle. Your own estimate will depend on your roof, so ask each installer to show how they worked out their generation figure and what shading they allowed for.

If you want battery storage now or later, mention it at the design stage, as it affects the choice of inverter. Our guide to solar panels with a battery explains the options.

Roof types and mounting options

Most Sussex homes have pitched roofs covered in clay or concrete tiles or natural slate, and slate is common on the Victorian terraces found in towns such as Brighton, Hove and Hastings. On a pitched roof, panels are usually fixed to rails held by brackets fixed to the rafters. Flat roofs on extensions, garages and some newer homes need a frame to tilt the panels.

If you are re-roofing anyway, roof integrated panels sit in place of some tiles for a flatter look. Ground mounted arrays suit larger gardens where the roof is shaded or unsuitable. Solar tiles are another option, though they cost considerably more. Sunsave gives these prices for a 4.9kWp system by mounting type.

Mounting typePrice for a 4.9kWp system
Roof mounted£8,029
Flat roof£9,635
Roof integrated£9,472
Ground mounted£10,438
Solar tiles£17,204

Source: Sunsave, How much do solar panels cost? [UK prices in 2026], last updated 24 September 2026. UK wide figures including installation.

Sunsave also lists racking at £500 to £1,000, which is the frame that holds the panels in place. Ask whether this is already included in your quote.

Most rooftop panels on houses in England are permitted development and do not need planning permission, but there are limits. The Planning Portal says panels on a pitched roof should not sit above the highest part of the roof, excluding the chimney, and should project no more than 200mm from the roof slope. Listed buildings, conservation areas and national parks, including the South Downs National Park, need more care. New permitted development rules came into force on 27 August 2026, and for 12 months from 27 August 2026 you can use either the old or the new rules. Our solar panel planning permission guide covers this in more detail.

Scaffolding and safe access

Installers need safe access to the roof, which usually means scaffolding. Prices vary with the height of the house, how many sides need covering and how easy it is to reach. TheEcoExperts puts scaffolding and access at £300 to £1,200, MyBuilder gives scaffolding at £300 to £700, and Checkatrade lists scaffolding at £800.

Scaffolding that stands on the pavement may need a licence from the local highway authority. Ask each installer whether scaffolding is included in their price and who arranges any licence.

What happens on installation day

With the scaffold in place, the team fits the mounting rails to the roof and then clips the panels onto them. Cables are run from the panels into the house, usually through the loft, to the inverter, which turns the direct current made by the panels into the alternating current your home uses. The inverter is often fitted in the loft, garage or a utility area, along with isolator switches and a generation meter.

An electrician then connects the system to your consumer unit, so expect the power to be off for part of the day. At the end, the installer should test and commission the system, show you how to switch it off safely, and help you set up any monitoring app.

Checkatrade puts labour at about £300 per installer per day. The installer can tell you how long your own job should take.

Registering with the network operator

Your system has to be registered with the Distribution Network Operator, the company that runs the local electricity network. The Energy Saving Trust says this is usually done by the installer. Sussex sits within the UK Power Networks area.

Larger systems, or a system combined with a big battery, may need the network operator's agreement before they are connected. Sunsave lists a three phase switch for G99 approval at around £5,700, which shows that grid connection can add real cost in some cases. Ask each installer whether your design needs prior agreement and who will apply for it.

Building Regulations and the compliance certificate

Even when you do not need planning permission, Building Regulations still apply. The Planning Portal says they cover the roof's ability to take the weight of the panels and other parts of the work such as the electrical installation, and it recommends using an installer, preferably one who belongs to a competent person scheme.

GOV.UK lists the competent person schemes that cover microgeneration and renewable technologies, including NAPIT, Certsure, BRE, Benchmark, BESCA, APHC, HETAS, OFTEC and STROMA. Registered installers can self certify that their work complies. They should notify the local authority and issue you a certificate of compliance, which GOV.UK says you should receive within 30 days of the work being completed.

Your MCS certificate and the Smart Export Guarantee

MCS matters for two practical reasons. Ofgem says that to receive Smart Export Guarantee payments, solar systems up to 50kW need an MCS certificate or equivalent. And the Warm Homes Loan Scheme rules say an MCS certified product must be installed by an MCS certified installer.

So ask every installer for their MCS number and look it up on the MCS website yourself. Sunsave notes that MCS installers have to join a consumer code approved by the Chartered Trading Standards Institute, such as RECC or HIES, so ask which one too.

Once your system is running, you can apply to an energy supplier for a Smart Export Guarantee tariff and be paid for the electricity you send to the grid. The Energy Saving Trust says you will typically get around 12p for every unit you do not use yourself, and Octopus says its Outgoing Octopus tariff is currently paying a flat 12p per kWh. Our Smart Export Guarantee guide compares the options.

How much solar panel installation costs

Prices depend on system size, roof type, access, the equipment chosen and whether a battery is included. These UK wide figures come from several sources, each quoted exactly as published. They are not prices for Sussex specifically.

SourceSystemPrice
Energy Saving TrustTypical 4.5kWp systemAround £7,600
Sunsave3.15kWp, 7 panels£5,695
Sunsave4.95kWp, 11 panels£8,029
Sunsave6.75kWp, 15 panels£10,949
Heatable3.0kWp, 7 to 8 panels£5,000 to £6,500
Heatable4.0kWp, 10 panels£6,500 to £8,000
Checkatrade3kW, terraced house£6,000
Checkatrade4kW, semi detached house£8,000
Checkatrade5kW, small detached house£9,000
Checkatrade6kW, large detached house£10,000
MyBuilder3kW, average cost£5,000
MyBuilder4kW, average cost£6,500
MyBuilder5kW, average cost£8,000
MyBuilder6kW, average cost£9,500
The Independent3kW£5,000 to £6,500
The Independent4 to 5kW£6,500 to £8,000

Sources: Energy Saving Trust (last updated 1 October 2026); Sunsave (last updated 24 September 2026, prices include installation); Heatable (last updated 14 April 2026); Checkatrade (price table last updated June 2026); MyBuilder (updated 21 August 2026); The Independent (last updated 28 September 2026, indicative examples). Solar only, no battery.

The closest regional figures come from TheEcoExperts, which gives South East figures of about £6,000 for a 3.5kW system and an average of £1,649 per kW in the South East. They cover the wider South East rather than Sussex alone, but they are the nearest published comparison.

Residential solar panels and batteries currently carry 0% VAT until 31 March 2027, after which the rate is due to go to 5%. For a fuller breakdown, see our solar panel cost guide and pricing page, or try the solar calculator.

What to check in a quote

Getting more than one quote is the easiest way to see what is fair for your home. Look past the headline price and make sure each quote covers the same things. Here is what to ask for and verify yourself.

  • The installer's MCS number, which you can look up on the MCS website.
  • Which consumer code they belong to, such as RECC or HIES.
  • Which competent person scheme covers their electrical work, and confirmation that you will receive a Building Regulations compliance certificate.
  • The make, model and number of panels, the total size in kWp, and the inverter and any battery being fitted.
  • An estimate of yearly generation, with the assumptions and shading allowance explained.
  • Whether scaffolding, racking, bird proofing and network operator registration are included.
  • Product and workmanship warranties in writing, and proof of insurance.
  • References from previous customers, and a written quote that states the VAT position and payment terms.

Get free solar installation quotes in Sussex

Up to 3 free, no obligation quotes from local solar installers. Our phone line and enquiries are open 24 hours, 7 days a week.

We pass your details to up to 3 local solar installers so they can contact you. See our privacy policy.

Frequently asked questions

Sources for the prices on this page

Prices are copied from each source as published and are a guide only. They are not quotes from installers in our network, and your own quotes will depend on your home and the work needed.