Solar panels Sussex

Advice

How to choose a solar panel installer

Choosing the right installer matters as much as choosing the right panels, because the quality of the design and fitting affects how much electricity you get, whether you can claim export payments and how easy it is to put things right if something goes wrong. This guide explains what to check, how to compare quotes fairly and which warning signs to look out for.

Start with the MCS number

MCS is the certification scheme for small scale renewable energy installations and products. Whether an installer is MCS certified affects more than peace of mind, because two important things depend on it.

First, the Smart Export Guarantee. Ofgem says that to receive export payments, solar PV systems up to 50kW must have an MCS certificate or equivalent. Sunsave's guide to MCS certificates notes that export tariffs tend to have strict requirements, one of which is MCS or Flexi-Orb certification. Without the certificate, you may not be able to get paid for the electricity you export.

Second, funding. The Warm Homes Loan Scheme rules say an MCS certified product must be installed by an MCS certified installer. If you hope to use the scheme, the installer has to meet this condition.

So the first question to ask any installer is for their MCS number. Then check it yourself on the MCS website, making sure the company name and the type of technology, solar PV or battery storage, match the work you are getting quoted for. Do not rely on a logo on a van or a website.

Check which consumer code they belong to

Sunsave explains that MCS installers have to join a consumer code approved by the Chartered Trading Standards Institute. The two you are most likely to come across are RECC, the Renewable Energy Consumer Code, and HIES, the Home Insulation and Energy Systems quality assured contractors scheme.

Consumer codes set standards for how installers deal with customers, covering things like sales practices, contracts and what happens if there is a dispute. Ask each installer which code they belong to and check their membership on that code's website. Read the code's guidance for consumers so you know what to expect from the sales process and the contract.

Competent person schemes and your compliance certificate

Solar panel installations must meet Building Regulations, both for the roof carrying the weight of the panels and for the electrical work. The Planning Portal recommends using an installer, preferably one who belongs to a competent person scheme.

GOV.UK lists the competent person schemes that cover the installation of microgeneration or renewable technologies: APHC, Benchmark, BESCA, BRE, Certsure, HETAS, NAPIT, OFTEC and STROMA. Installers registered with one of these can self certify that their work is compliant. GOV.UK says they should notify the local authority of the work and issue you a certificate of compliance, and that you should receive it within 30 days of the work being finished.

Ask each installer which competent person scheme they are registered with, and check it. Keep the compliance certificate with your MCS certificate and warranty documents, as you will need them if you sell your home or make a claim. The Energy Saving Trust also says the system must be registered with the Distribution Network Operator, which is usually done by the installer, so confirm that this is included.

Comparing up to 3 quotes like for like

Getting more than one quote is the best way to understand what a fair price looks like for your home, but quotes are only useful if you can compare them properly. Two quotes for systems of different sizes, with different panels and different warranties, are not directly comparable. Ask each installer to set out the following in writing.

  • System size in kWp, the number of panels, and the make and model of the panels.
  • The inverter: make, model, type and warranty, and whether it can work with a battery if you might add one later.
  • Any battery: make, model, usable capacity and warranty, including whether the warranty is limited by years or charge cycles.
  • Scaffolding and access: whether scaffolding is included in the price, or quoted separately.
  • Bird proofing, monitoring apps, roof repairs or electrical upgrades, and whether each is included.
  • Warranties on the panels, the inverter, any battery and the workmanship, and who provides each one.
  • An estimate of how much electricity the system will generate each year on your roof, and how it was worked out, including the roof direction, pitch and any shading assumed.
  • VAT. Residential solar panels and batteries carry 0% VAT until 31 March 2027, so check that each quote shows the correct rate.

Once you have these details side by side, differences in price usually become easier to explain. A cheaper quote may use a smaller system or fewer extras, while a more expensive one may include a battery, premium panels or longer warranties. Our solar panel cost guide gives published price ranges to help you sense check the figures.

Generation estimates and what they assume

The generation estimate is one of the most important numbers in a quote, because savings and payback are built on it. Ask how it was worked out and what it assumes about roof direction, pitch and shading. The Energy Saving Trust says a system facing east or west tends to get around 15 to 20% less energy than one facing directly south, so an estimate for an east or west roof should reflect that.

Be cautious if one installer's generation figure is far higher than the others for the same roof and system size. Ask them to explain the difference. Savings estimates should also say what electricity price and what share of self use they assume, because both make a big difference to the result.

Deposits and payment

It is normal for installers to ask for a deposit when you sign a contract, with the rest due on or after completion. Before paying anything, read the contract carefully and make sure you understand how much you are paying at each stage, what happens if the installation is delayed or cancelled, and how any deposit is protected.

Your consumer code's guidance will explain what it expects from members on deposits and contracts, so it is worth reading before you sign. Avoid paying the full amount before work starts, and keep records of every payment. Paying part of the cost by credit card may give you extra protection, so check with your card provider. You should also be told about your right to cancel if you sign a contract at home.

Red flags to watch out for

Most installers will be happy to answer questions and give you time to decide. These are the warning signs that should make you slow down or walk away.

  • Pressure to sign on the day, such as a discount that disappears if you do not commit immediately.
  • Cold calls or doorstep visits offering free solar panels or a grant that sounds too good to be true.
  • Reluctance to give an MCS number, consumer code or competent person scheme, or details that do not match when you check them.
  • No written quote, or a quote without the system size, panel and inverter models or warranties.
  • Savings or generation figures that are much higher than other quotes for the same roof, with no clear explanation.
  • Requests for full payment up front, or for payment in cash only.
  • No mention of the compliance certificate, MCS certificate or Distribution Network Operator registration.

Questions to ask any installer

Use these questions when you speak to installers, and ask for the answers in writing where you can.

  • What is your MCS number, and which technologies does it cover?
  • Which consumer code do you belong to, RECC or HIES?
  • Which competent person scheme are you registered with, and will you send me a compliance certificate?
  • Will you register the system with the Distribution Network Operator?
  • How did you work out the generation estimate, and what shading did you allow for?
  • What warranties come with the panels, inverter, battery and workmanship, and who provides them?
  • Is the warranty insurance backed if your company stops trading?
  • Do you have public liability insurance, and can I see it?
  • Can you give me references from recent customers, ideally with similar homes?
  • Who will carry out the work, and will you use subcontractors?
  • How much deposit do you need, when is the rest due, and how is my deposit protected?

Get quotes to compare

Solar panels Sussex is not an installer. We pass your enquiry to up to 3 local solar installers so you can get free, no obligation quotes and compare them using the checks on this page. Whatever route you take to find an installer, check the MCS number, consumer code and competent person scheme yourself before you sign.

Call 01273 115520 or use the form on this page. Our phone line and enquiries are open 24 hours, 7 days a week. You may also find our guides to whether solar panels are worth it and planning permission useful before you compare quotes.

Get up to 3 free solar quotes

Up to 3 free, no obligation quotes from local solar installers. Our phone line and enquiries are open 24 hours, 7 days a week.

We pass your details to up to 3 local solar installers so they can contact you. See our privacy policy.

Frequently asked questions

Sources for this page

Prices are copied from each source as published and are a guide only. They are not quotes from installers in our network, and your own quotes will depend on your home and the work needed.